3D spausdintuvų reikmenys
Filtrai
- Gembird (18)
- Flashforge (5)
- AVTEK (1)
- Geltona (3)
- Mėlyna (3)
- Balta (2)
- Pilka (2)
- Sidabrinė (2)
- Juoda (1)
- Oranžinė (1)
- Raudona (1)
- Ruda (1)
- Žalia (1)
- Nenurodyta (7)
- Normal (5)
- Nenurodyta (19)
- 0,35 kg – 0,5 kg (1)
- 0,5 kg – 0,75 kg (4)
- Nenurodyta (19)
- Any brand (2)
- For 3D printers (20)
- A 3D printer with 1.75 mm extruder of temperature around 200 °C, suitable for PLA filament (1)
- Can be applied to a variety of 3D printers (1)
- 1,5 mm – 2,5 mm (6)
- Nenurodyta (18)
- 1.75 mm (6)
- 84779080 (3)
- 330 m (8)
- 400 m (3)
- High precision roundness enables higher printing quality. No bubbles, vivid colors. Can be applied to a variety of 3D printers. (1)
- Box (5)
- 0,05 kg – 0,075 kg (4)
- 0,075 kg – 0,1 kg (3)
- 0,15 kg – 0,25 kg (2)
- 0,25 kg – 0,35 kg (10)
- 0,35 kg – 0,5 kg (4)
- Nenurodyta (1)
- Polylactic acid (PLA) (6)
- Gembird - black - PLA filament (2)
- Gembird - black - ABS filament (1)
- Gembird - brown - PLA filament (1)
- Gembird - green - ABS filament (1)
- Gembird - green - PLA+ filament (1)
- Gembird - grey - PLA filament (1)
- Gembird - ice blue, dark blue - silk PLA filament (1)
- Gembird - Marble - PLA filament (1)
- Gembird - orange - PLA+ filament (1)
- Gembird - purple - PLA filament (1)
- Gembird - red - PLA+ filament (1)
- Gembird - silver - ABS filament (1)
- Gembird - silver - PLA+ filament (1)
- Gembird - sky blue - PLA filament (1)
- Gembird - white - PLA+ filament (1)
- Gembird - yellow - ABS filament (1)
- Gembird - yellow - PLA+ filament (1)
- Gembird 3DP-PENLT-01 - 3D printing pen (1)
- Filament, PLA "Three galaxy" (1)
- Filament, PLA Flexible (1)
- Filament, PLA Silk Ice (1)
- PLA "marble" filament, 1.75 mm, 1 kg (1)
- PLA-PLUS filament, white, 1.75 mm, 1 kg (1)
- PLA filament (5)
- ABS filament (3)
- PLA+ filament (3)
- 1 (19)
- Density at 21.5 °C: 1.25 g/cm3. Melt Flow Index at g / 10 min 190 °C / 5 kg: 5. Melt Point: 195 °C - 235 °C. Heat-Deflection-Temperature: 47 °C. Yield Strength at 5 mm / min: 72 MPa. Impact Strength: 12 KJ/m. Ensile Break: 30 %. Diameter: 1.75 mm ± 0.05 mm. Spool dimensions: 200 mm (diameter) x 67 mm (height) x 53 mm (central hole) (1)
- 1.75 mm diameter, 1kg/spool (19)
- 3 mm diameter, 1 kg/spool (1)
- 1 kg (5)
- 0.5 kg (1)
